HCalory 5-8KW 12V Car Parking Heater Diesels Air All in 1 LCD Thermostat for Car Truck SUV Bus RV Boats

Description

Mixed new and old inventory: Recently, some customers have reported that they have received the stock of the fuel tank pattern switch. Please be aware that the fuel tank pattern switch is the original stock, and the OK pattern switch shown in the current picture is a newly purchased stock, and the functions of the two are little different (see the last detail picture), but the cost is the same.Thank you for understanding.

 

Type:

Type 1 ：12V/24V/220V 5-8kw EU Plug

Type #A: 5-8kw single hole old LCD

Type #B: 5-8kw single hole blue LCD

Type #C: 5-8kw single hole red remote control

Type #D: 5-8kw single hole dual LCD

Type #E: 5-8kw single hole trapezoidal LCD

Type #F: 5-8kw horizontal new LCD

Type #G: Camo trapezoidal LCD

Type #H: 5-8kw Voice LCD

Type #I: 5-8kw single hole gold LCD

Type #J: 220V European standard new common key switch

 

Specifications:

Material: Metal+Plastic

Color: Red+Black

Size: 42x41x15.5cm

Voltage: 12V

Power: 5-8KW

Fuel Tank Capacity: 5L

Fuel: Diesel

Complete combustion rate: 100%

Fuel consumption: 0.1 liters per hour oil

Working Temperature of the Heater: -40℃~+50℃ 

Working Temperature of the Oil pump: -40℃~+40℃  

 

Features:
– Get rid of damage to car causing by the sudden drop of temperature.
– Low noise: noise reduction processing with minimal noise.
– Easy installation: the compact design is good for using in a variety of narrow spaces.
– Low fuel and power consumption for longer periods of operation.
– Smooth, automatic room temperature control with temperature pre-set facility.
– With continuous monitoring and diagnostic system.
– Fuel supplied from the vehicle’s own tank.
– Applicable to: various diesel mechanical vehicles such as cars, buses, RVs, trucks, engineering vehicles, etc.

Operation:
1. Query machine status (keep short press of the ‘OK’ key to switch one state at a time and display it in a loop)
Time display →ambient temperature display → setting temperature display (automatic temperature stabilizing) / setting oil mass display (manual temperature stabilizing) → supply voltage display →altitude display – historical fault code display – press the ‘OK’ key to check

2. Fuel filling description manually
Under the OFF state, press the down-regulate and setting key simultaneously to conduct fuel filling manually, which displays HOF, after releasing, press again and it displays HON, the oil pump starts to work. You can hear the sound of the oil pump and the oil pump icon lights up. Press down to display HOF, exit fuel refill, the oil pump icon disappears. The process of line air evacuation shall be done under watch, when the oil re-aches the position of the oil inlet of the machine, it can be stopped. If there is too much oil enters the machine, there will be black when igniting.

3. Description of temperature control mode switching